SUPPORT > Technical Information & Specif_ BAOJI QIYUEXIN TITANIUM METAL CO., LTD

With our vast knowledge of Titanium, we hope the below technical and specification information is a helpful resource for our customers.

Tech Properties of Titanium:

GRADE	YIELD STRENGTH MIN		ULTIMATE TENSILE STRENGRH MIN		LONGATION MIN
REF NO.	KSI	Mpa	KSI	Mpa	%
GR1	25	170	35	240	24
GR2	40	275	40	345	20
GR3	55	380	65	450	18
GR5	120	830	130	895	10
Ti-6-2-4-2	120	830	160	1100	10

Titanium ASTM Specifications:

ASTM American Association for test and Materials Association

ASTM B229-2001	Sponge titanium
ASTM B265-2005	Titanium and titanium alloy strips, plates and plates
ASTM B337-1995	Titanium and titanium alloy seamless pipe and welded pipe (have been replaced by B861-2002 titanium and titanium alloy seamless pipe, B862-2002 titanium and titanium alloy welded pipe)
ASTM B338-2005a	Seamless and welded tubes for titanium and titanium alloy condensers and heat exchangers
ASTM B348-2005	Titanium and titanium alloy rods and blanks
ASTM B363-2004	Seamless and welded pipe fittings of non alloy titanium and titanium alloy
ASTM B367-2004	Titanium and titanium alloy castings
ASTM B861-2002	Titanium and titanium alloy seamless tube
ASTM B862-2002	Titanium and titanium alloy welded pipe
ASTM B381-2005	Titanium and titanium alloy forgings
ASTM F67-2000	Pure titanium material for surgical implants
ASTM F136-2002a	Ti-6Al-4V ELI processing materials for surgical implants
ASTM F620-2002	Titanium alloy forgings with α+β phase for surgical implants
ASTM F1108-2002	Ti-6Al-4V castings for surgical implants
ASTM F1295-2001	Ti-6Al-7Nb processing materials for surgical implants
ASTM F1341-1999	Pure titanium wire
ASTM F1472-2002a	Ti-6Al-4V processing materials for surgical implants
ASTM F1713-1996	Ti-13Nb-13Zr processing materials for surgical implants
ASTM F1813-2001	Ti-12Mo-6Zr*2Fe processing materials for surgical implants

PRODUCTS

SUPPOT